The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The Comp Mountain Bike shoes take a whole lot of comfort, mix it with some serious pedaling efficiency, and add a layer of grippy trail traction for good measure. The result is a feature-packed and reliable all mountain shoe that delivers the right mix of performance and durability for a variety of trail conditions. Designed with Body Geometry attributes at the forefront, the comfortable fit and stiff sole provide maximum pedal efficiency and power transfer. The Boa S2-SV dial, meanwhile, is easily replaceable without using any tools, and it allows for on-the-fly fit adjustments. The materials used in the construction are also designed to take a beating, whether it be an accidental root or rock strike, while the SlipNot tread gives you reliable trail traction when you need it. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Injection-molded nylon composite outsole with SlipNot rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0. - Single Boa S2-SV dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Dial & lace assembly is replaceable in seconds with Snap cartridge system. - Hard-molded toe kick for protection and durability. - Stitched synthetic and mesh upper with asymmetric strap closure for a comfortable fit. - Two-bolt SPD-style cleat pattern fits all major MTB pedals. - Standard Fit last for all-day comfort. - Replaceable toe studs. - Approximate weight: 365g (1/2 pair, Size 42)

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head-on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

Mountain Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider, designed to have just as much performance when hiking as it does when riding. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. Approximate weight: 386.5 grams.

Just because winning an XC World Cup isn’t on your to-do list, doesn’t mean you don’t value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in the saddle performance. We’ve also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won’t get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Designed for pushing the limits of enduro racing and trail riding, Specialized's 2FO ClipLite Lace delivers pedal connection, comfort, and protection in a simplified lace-up version. This ultra-light version of the popular 2FO Clip is engineered for smooth pedal entry and exit with the Landing Strip cleat pocket, meaning you can focus on going fast on the descent, without the weight penalty for your climb back to the top. It’s foot out, flat out—on a diet. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Lacelock elastic keeps laces out of the chainrings. - Stiff Lollipop nylon composite plate for high performance pedaling and off bike comfort. - SlipNot rubber sole for confident traction. - Asymmetric toe box protection where you need it. - Extended length cleat slot (4mm) for rearward cleat set up option. - Smooth thermobonded upper for lightweight durability and a snag-free profile. - Cushioned EVA midsole for comfort with molded heel cup for stability. - Standard Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 379g (1/2 pair, size 42)

When your rides see you going anywhere from the pump track to the office, Specialized recommends their Skitch shoes. They have ultra-grippy SlipNot rubber for extra traction and durability, while the plush Lollipop construction offers even more cushion than what's found on their 2FO mountain shoes. You'll also find hassle-free laces to "button-up" the fit, and reflective accents throughout to help boost your visibility to motorists in low-light conditions. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Fully waterproof toe prevents water from seeping in, and it's also scratch-resistant for anyone that's riding with toe clips. - Reflective material used at the heel and side in order to increase your visibility to motorists in low-light conditions. - Slip not rubber for durability and grip. - Lollipop construction is plush and even softer than what's used on their 2FO shoes. - Low profile design for comfort off of the bike or when worn with jeans. - Full-length EVA foam for immediate and all-day comfort off of the bike - Lacelock elastic keeps laces out of chainrings. - Approximate weight: 275g (1/2 pair, size 42)

The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA® Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot™ FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA® Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa® guarantee. - Lollipop™ nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL™ hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip™ cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

Foot-Out, Flat-Out—the 2FO Flat 1.0 was designed to provide comfortable, all-day riding, while still looking the part for when it's time to grab a post-ride libation. Its outsole features our SlipNot 2.0 rubber compound, which was developed as a system to create the best pedal connection possible. Contrary to popular belief, pedal connection isn’t just about rubber—the rubber hardness, stickiness, lug pattern, midsole thickness, and density all contribute to this connection. Along with the new sole, we've also implemented captured foam into the forefoot top, providing protection from rocks and roots when the trail turns gnarly. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - SlipNot 2.0 rubber compound is our softest, grippiest rubber ever and is optimized for ultimate pedal connection. - Engineered lug pattern designed specifically to integrate with pedal pins. - Internal bootie provides improved comfort and control. - Captured foam in the upper protects the foot from impacts. - Air mesh on the tongue and upper provides protection and quickly sheds water weight. - Smooth thermobonded upper for lightweight durability and a snag-free profile. - Cushioned EVA midsole is sealed with a protective skin for support and tear resistance. - Lacelock elastic keeps laces out of chainrings. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Approximate weight: 315g (1/2 pair, Size 42)

With the Recon 1.0 our goal was simple—put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we’ve created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat—efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. We’ve also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)

There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.