Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

Sigma's replacement spoke magnet fits standard spokes and works with Sigma speed sensors.

- Universal design - Use: Fits single rail

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included

- Newbaum's Cotton Cloth bar tape is produced from highly durable milled cotton cloth - Vibrant colors are produced from eco-friendly dyes for a lower impact on the environment - Sold in individual rolls. Made in the USA

It's always a good idea to have backup hardware. This is a replacement hardware pack for Portland Design Works Payload or Loading Dock rear racks. - 2x P clamps - 4x nyloc nuts - 4x hex bolts

Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).

Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

• Lycra slip-on cover • Non-slip gripper • Quick attaching system • Lightweight cover

• Waterproof nylon seat cover • Protect your saddle from dirt and water

• Waterproof nylon seat cover • Protect your saddle from dirt and water

• Waterproof nylon seat cover • Protect your saddle from dirt and water

Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products. BENEFITS: ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade! - Easy to Install - Hassle Free - Self-Bonding - No Residue - No Adhesives - UV Resistant NO CLEAN UP: The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed! USES: There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs. Some other great uses include: - Tool Handles - Finishing Tape - Protecting Wear Points - And Much More The possibilities are endless!

Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile

Rider Safety Safety for every rider is of the utmost importance. Features - Ball & socket for optimum viewing angle - Compatibility: Fits drop and flat bars - Quick Assembly: Bar end mount - Construction: Molded thermoplastic with ultra-clear 800R glass lens - Weight: 0.18 lb / 82g

- Universal design double rail saddle clamp

- Reversible mirror mounts inside the handlebar and can be rotated 360º for use on either side - Acrylic convex mirror lens - High impact resistant plastic body - Fits 15.8-21mm ID handlebars - Mount: Bar End

BarBag is designed to let you take your adventure farther.  Providing easy to access on-the-bike storage, it allows for one handed opening and closing on the go. Its Magnetic MagCro latch keeps things closed no matter the riding conditions and its design does not interfere with standing and pedaling. - Secure and easily accessible on the bike nutrition/phone/wallet/tool storage - Clear lid with automatic MagCro(TM) latch allows riders to easily access contents even in the roughest of conditions - Exact shaping to fit on the side of the stem while allowing standing pedaling without knee interference - Dimensions (trapezoidal shape):16cm x 7 cm x 5 cm and 7 cm deep (0.6 liter capacity) - GPS/Bike Computer bumper provided for spacing the bag away from the stem

• Lycra slip-on cover • Non-slip gripper • Quick attaching system • Lightweight cover

The Third Eye Hardshell Helmet Mirror clips on to all hardshell helmets and many helmet visors. Its distortion-free, shatterproof glass mirror allows you to see what's coming from behind so you can ride defensively and safely.

Sunlite's CE-1 Bar End Mirror offers a nice, wide and clear view of what's behind so you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. And, it's light and fully adjustable.

Give yourself 360 degrees of visibility with Sunlite's Sport Helmet Mirror. It mounts to either your glasses or to your helmet and has a fully adjustable arm for maximum viewing angle.

Features - Construction: Molded thermoplastic with ultra-clear 800R glass lens and backside reflector for added safety - Adjustability: Flexible neck delivers optimum viewing angle - Compatibility: Fits any bar with up to 1" (25.4mm) diameter - Quick Assembly: Tool-free mount with included thumb screw

Speed up your T2 transition with the Sitero Hook. Adding the Sitero Hook to the rear of your Specialized Sitero saddle (sold separately) gives your bike a more secure hold on event stands. It includes the hook and two bolts.

Make the most out of valuable behind-the-seat real estate with the Sitero Tri-Pod. Add the Sitero Tri-Pod to the rear of your Specialized Sitero saddle (sold separately) and then bolt on a bottle cage for an elegant, aerodynamic storage solution. It includes the hook and two bolts.

• Heavy duty • Fits most bars

Sunlite's Steel Frame Pump looks great on retro frames and modern road steeds alike. Its long steel barrel makes pumping up tires a breeze. And, it comes with mounting clips if your frame doesn't have a pump peg or your top tube isn't quite the right length.

- Special microcellular structured tape material is waterproof and conforms to bar shapes - High elastic modulus provides vibration-damping and comfort - Embossed logo throughout tape length and self-adhesive backing - Black plastic end plugs and finishing strips

Perfect for keeping a saddle dry in rainy weather Whether you’re out on the road or parking your bike outdoors, keep your bike seat dry with our Waterproof Bike Seat Cover. When skies are blue, it neatly stores under your saddle where it’s ready for action when rain drops start falling on your head. - Rip stop coated nylon material provides a waterproof barrier between the elements and your bike seat - Reflective strap for increased visibility - Elastic drawstring creates snug fit - Neatly stores with hook-and-loop strap under saddle when not in use - One size fits most sport and recreation saddles - Fits Planet Bike bike seat models: 5000, 5000-1, 5001, 5001-1, 5005, 5006, 5015, 5016, 5020, 5021