Filter By:

  • Show More Brands

  • Show Fewer Brands

CO2 Inflators

Specialized CPRO2 Pump
$25.00
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
Specialized MTN Tube Spool
$20.00 - $35.00
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Ingenious design allows the spare tube to be rolled up, while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accommodate all different size mountain tubes
Serfas Combo Kit w/CO2 Inflator
$50.00
Serfas has the basics covered with the Combo Kit. It comes with their Micro Blast CO2 inflator, 2 16-gram threaded cartridges, a 6-piece mini-tool, and a set of tire levers, as well as a seat bag to carry it all.
Serfas ST-17i Mini Tool w/Inflator
$45.00
A CO2 inflator and full-featured mini tool in one! Serfas' ST-17i features 2, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, and 3.23, 3.3, 3.45, 3.96mm spoke wrenches. In addition, it boasts a 10mm open end wrench, a chain breaker and a CO2 inflator head (cartridges sold separately). With all that, this small tool's capabilities are hardly mini.
Planet Bike Red Zeppelin CO2 Inflator
$20.00
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
MSW XLA-40 Air Cartridge
$13.00
This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading
Genuine Innovations CO2 Refill Cartridges (20-pack)
$3.50 - $95.80
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
Genuine Innovations Mountain Pipe
$40.00
Genuine Innovations' Mountain Pipe captures the best of both worlds by combining a CO2 inflator with a manual pump. It fits Presta and Schrader valves and smartly controls the flow of CO2 with Twist-to-Inflate technology. And, you'll never run out of air thanks to the built-in hand pump. The Mountain Pipe also features a hidden container in the handle to store patches and comes with a threaded 16-gram cartridge to get you going.
Topeak Airbooster G2 CO2 Inflator
$50.00
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak Ninja CO2
$44.95
Ultimate flexibility is a hallmark of the Ninja series, and Ninja CO2 is no exception. Mount it to your bike with most water bottle cages to match the aesthetics that best suit you. The included Micro AirBooster and 2 threaded 16g CO2 cartridges make fixing flats easy with quick access by a simple twist. - Material: Aluminum / Engineering grade plastic - Inflator Head: Presta / Schrader Push to inflate - Inflator Material: CNC aluminum - Compatibility: Non-adjustable water bottle cage - Added Features: 2 threaded 16g CO2 cartridges Compartment for CO2 inflator & cartridges - Size: 16.7 x 9.3 x 5.4 cm / 6.6” x 3.7” x 2.1” - Weight: 191 grams
Specialized Air Tool C02 Mini Kit (16-gram)
$28.00
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 16-gram C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized Air Tool C02 Mini Kit (25-gram)
$30.00
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 25g C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized CPRO2 Trigger With Gauge
$45.00
The easiest way to use CO2. - Gauge confirms proper inflation, making it easy to adjust pressure mid-ride. - Thumb trigger gives precise control. - Accommodates threaded 16g and 25g cartridges. - One 16g CO2 cartridge included.
Serfas CO2-25T20 25 Gram CO2 Threaded Cartridge (20 Count)
$80.00
High Quality, Compact, and Easy-to-Use CO² Threaded Cartridges. - High Capacity 25 Gram Threaded Cartridges - Fits All CO² Pumps That Accept 16G Threaded - Small, Compact, Easy To Use - 1 Box / 20 Cartridge Count
Serfas MB-3N Micro Blast Inflator Head
$25.00
The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head will get you back on your way in a hurry. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits All Threaded CO2 Cartridge Sizes - Alloy Mini Head With Threaded Spring Push Design - Small, Lightweight, Compact Design - Weight: 18 Grams w/o CO2s
SKS Airbuster CO2 Inflator
$29.00
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
SKS TL-Head Set
$40.00
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
Profile Design CO2 Mounting Bracket
$25.00
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Portland Design Works Barkeep Inflator
$42.00
The BARkeep integrates Portland Design Works' exclusive Tap Handle technology that carefully controls the flow of CO2. Compatible with both Presta and Schrader valves, the BARkeep also integrates a pressure gauge to ensure a perfect pour to fix your flat. A beginner-friendly CO2 inflator! - CO2 inflator with integrated pressure gauge - PDW exclusive Tap Handle technology controls CO2 flow while protecting your hand from frosty cartridges  - Weight: 94g (3.3oz) - Length with Tap Handle: 175mm (6.9") - Length without Tap Handle: 87mm (3.5")
Portland Design Works Ninja Pump
$42.00
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty
Portland Design Works Shiny Object CO2 Inflator
$24.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 
Portland Design Works Shiny Object CO2 Inflator w/cartridge
$32.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. It includes a control knob to keep you in charge of the pressure and a threaded Co2 cartridge with a neat leather sleeve. And, it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)  - Leather sleeve length: 55 mm (2.25") - Weight of inflator with cartridge: 80 g (3 oz)
Portland Design Works Tiny Object
$28.00
Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs. - Presta valve compatible - Control knob easily regulates CO2 flow - Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes - Lifetime PDWarranty
Planet Bike 12-Gram CO2 Cartridge 3-Pack (Threaded)
$13.00
Planet Bike's 12-Gram CO2 Cartridge 3-Packs are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike Air Kiss, Red Zeppelin, Airship and other manufacturers' inflators that use threaded cartridges. The pack includes an insulator sleeve.
Planet Bike 16-Gram CO2 Cartridge - Threaded
$16.00
Planet Bike's 16-gram CO2 Cartridges are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Air Kiss, Red Zeppelin, Airship, and other manufacturers' inflators that use threaded cartridges.
Planet Bike 25-gram CO2 Replacement Cartridges - Threaded
$14.00
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
Planet Bike Air Kiss CO2 Inflator
$12.99
Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.
Planet Bike Airship 2.0 CO2 Bike Tire Inflator
$24.00
Blast off with Planet Bike's Airship 2.0 CO2 Bike Tire Inflator. It's lightweight, strong and easy to use. Stash it in your bike bag or jersey pocket and away you ride. - Lightweight aluminum design stores cartridge and protects from cold cartridge when in use - Auto head fits both Presta and Schrader valves - Accepts 16g threaded and non-threaded cartridges - Includes one 16g threaded CO2 cartridge - Small size fits in saddle bag or jersey pocket - Length: 130mm - Weight: 123 grams
Planet Bike Red Zeppelin CO2 Bike Tire Inflator (Metal Head Only)
$15.00
Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs. - Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use - Threads directly onto Presta or Schrader valve without adapter - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 48 x 40 x 25 mm - Weight: 56 grams
Planet Bike Red Zeppelin CO2 Inflator Head
$12.00
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
Page 1 of 2 Next page